Current Category
Heaters, Spa Heater Elements & Parts > Heater Elements
Spa heater elements and element assemblies for all spa heaters - if you can't see your spas heater element, contact us with photos for ID
 |
 |
 |
 |
 |
hq 26-0068a
Hydroquip 2.0kw 1.5" Heater Tube Assy
Hydroquip in-line 1.5" heater tube with welded in 2.0kw element,and pressure switch thread. (these tubes are much smaller diameter than most heater tubes. Element cannot be removed as it is welded into the tube.
Hydroquip packs may also be marked with 'Pentair Spa & Bath Products.
|
Price:
AUD
|
|
|
 |
 |
 |
 |
|
|
|
|
|
|
 |
hs oldcircheat1
Hot Spring Spas Heater element
Hot Spring Spas heater element - from early 90's
OBSOLETE
Fits into a large plastic cylindrical heater tank, with plumbing unions reducing to 3/4" tubing - on the circulation pump system.
Complete heater assembly needs to be replaced with hs s2052 listed above.
|
AUD
|
Use hs s2052 above
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
hs oldcircheat2
Hot Spring Spas Heater element
Hot Spring Spas heater element - from early 90's
OBSOLETE
Fits into a large plastic cylindrical heater tank, with plumbing unions reducing to 3/4" tubing - on the circulation pump system.
Complete heater assembly needs to be replaced with hs s2052 listed above.
|
AUD
|
Use hs s2052 above
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
b 58132
Balboa Slave Heater - 5.5kw - Suits GL / GS Systems
Balboa 5.5kw slave heater - complete in plastic enclosure - including M7 temperature sensors and PCB.
For use with existing GS / GL control system only.
Used on Swim Spas or where additional heating is required.
|
Price:
AUD
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
l 7073p
Laing Infinity Gecko SSPA spa heater - 2.1kw
Laing Infinity 2.1kw circulation style heater to suit Gecko Electronics SSPA spa packs and other circulation heater applications. Includes thermal hi limit and pressure switch.|
Used on Heritage Spas, Lanark Spas, Southwest Spas, Sierra Spas and others
A retrofit heater to also suit Hot Spring Spas - older models - cable tie temp sensors to the heater tube. Newer models - modify the sensor plastic surround to allow sensor to contact heater tube when cable tied to it. Please specify if replacing a hotspring Spas heater and we will add a plumbing adaption kit to suit.
|
Price:
AUD
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
bow d1001
Bowman 6kw Spa Heater Element
Used in Bowman single phase 6kw spa heaters. Older inline Bowman Spa Heaters used Aquatemp Thermore elements listed below.
|
Price:
AUD
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
at 70-20116 te
Aquatemp Thermcore 1.5kw Tefel Coated spa heater element
Small sized element common in 10A spa systems
Aquatemp epoxy potted (EP) tefel coated 1.5kw spa heater element
used in USA made heater tubes used in Balboa, Gecko, Spa Builders, Spaquip, RMF, Aquatemp, Thermcore, Heat Channel, Trueheat and many other heaters used by LA Spas, Sundance Spas, Bullfrog, Signature, Monarch, Maax, Lanark, Heritage, Carribean, Palm Springs, Hibiscus, Sweetwater, Cyclone, Leisurite, and many others
|
AUD
|
Use Gecko 1.3kw element
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
at 70-20620 te
Aquatemp Thermcore Tefel Coated spa heater element 2.0-4.0kw
Aquatemp teflon elements - 2kw, 3kw, 4.0kw
Aquatemp epoxy potted (EP) tefel coated spa heater elements
used in USA made heater tubes used in Balboa, Gecko, Spa Builders, Spaquip, RMF, Aquatemp, Thermcore, Heat Channel, Trueheat and many other heaters used by LA Spas, Sundance Spas, Bullfrog, Signature, Monarch, Maax, Lanark, Heritage, Carribean, Palm Springs, Hibiscus, Sweetwater, Cyclone, Leisurite, and many others
|
Price:
AUD
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
at 70-20119te
Aquatemp Thermcore Tefel Coated spa heater element 3.0kw
Aquatemp teflon element - 3kw - suits Balboa M7 heaters used in Signature Spas, Leisureite Spas and many others
Aquatemp epoxy potted (EP) tefel coated spa heater element
Especially shaped to suit Balbao M7 heater tubes fitted with two temperature sensors - the element does not interfere with sensors (above elements shape can cause either element to physically interfere with the temp sensor probe or produce false temperature readings resulting in faults - this element avoids that problem). This element can also be used in place of the above element as well.
used in USA made heater tubes used in Balboa, Gecko, Spa Builders, Spaquip, RMF, Aquatemp, Thermcore, Heat Channel, Trueheat and many other heaters used by LA Spas, Sundance Spas, Bullfrog, Signature, Monarch, Maax, Lanark, Heritage, Carribean, Palm Springs, Hibiscus, Sweetwater, Cyclone, Leisurite, and many others
|
Price:
AUD
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
at 70-20620
Aquatemp Thermcore Spa heater element 5.5kw
5.5kw elements
Aquatemp epoxy potted (EP) incoloy spa heater elements
used in USA made heater tubes used in Balboa, Gecko, Spa Builders, Spaquip, RMF, Aquatemp, Thermcore, Heat Channel, Trueheat and many other heaters used by LA Spas, Sundance Spas, Bullfrog, Signature, Monarch, Maax, Lanark, Heritage, Carribean, Palm Springs, Hibiscus, Sweetwater, Cyclone, Leisurite, and many others
|
Price:
AUD
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
at 40-50000
Aquatemp Thermcore heater element Hardware Kit
Aquatemp heater element hardware - element nuts, terminal nuts and washers
Supplied standard with elements. Available seperately for repair jobs.
Used in USA made heater tubes used in Balboa, Gecko, Spa Builders, Spaquip, RMF, Aquatemp, Thermcore, Heat Channel, Trueheat and many other heaters used by LA Spas, Sundance Spas, Bullfrog, Signature, Monarch, Maax, Lanark, Heritage, Carribean, Palm Springs, Hibiscus, Sweetwater, Cyclone, Leisurite, and many others
|
Price:
AUD
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
sq 99112
Spaquip 5.5mm Nut Driver / Nut Runner
Tool necessary for the replacement of Ampac / Spaquip Pulsar, 2095 and Intuitive series heater elements
5.5mm nut driver - For use with above element (not required for below heater assembly)
|
Price:
AUD
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
sq 950155
Spaquip Spa Power 400 heater assembly
Suits Spa Power 400 systems only - Teflon coated element with optical water sensor. 2 x electrical/electronics connectors - AMP 4 pin and low voltage sensors cable. Even though it is physically very similar to the Pulsar / 2095 / Intuitive series heaters, it is incompatible.
|
Price:
AUD
|
|
|
|
|
|
|
|
|
