Waterway Spa and Pool Pump Parts - Executive

	ww 811-1001 Waterway Executive Pump Mechanical Seal Suits Waterway Executive pumps Original Waterway 5/8" ceramic cup seal type 7 Price: AUD QTY:

	310-4220 Waterway 0.75hp executive workman pump impeller (1hp USA) The hp rating listed is actual horsepower.Some manufacturers label pumps with BHP (brake Horsepower) Sold in Australia on 0.75-1hp executive workman pumps 5mm vane width x 6 vanes, 116mm diameter. Unarked in suction throat on most. Price: AUD QTY:

	ww 310-4210 Waterway 1.25hp executive pump impeller (2hp USA) The hp rating listed is actual horsepower.Some manufacturers label pumps with BHP (brake Horsepower) Sold in Australia on 1.5hp pumps with Magnetek motors in the late '90's. If in doubt, read the motor rating label, and email with details 7mm vane width x 6 vanes, 115mm diameter. Marked 2hp in suction throat on most but not all. USE ww310-4200 LISTED BELOW AUD Buy 310-4200 below

	ww 310-4200 Waterway 1.5hp (1.1kw) executive pump impeller (3hp USA) 10mm vane width x 6 vanes, 115mm diameter. Marked 3hp in suction throat on most but not all. Price: AUD QTY:

	ww 310-4190 Waterway 1.75hp / 2hp executive pump impeller - Southwest Spas / Sierra Spas (4hp USA) The hp rating listed is actual horsepower.Some manufacturers label pumps with BHP (brake Horsepower) In the case of a Southwest Sierra Spa 2hp pump, they are sometimes labelled 4hp. The impeller is marked with 4hp in the throat of its suction. This impeller is used in pumps exported to Korea as a 2hp 60Hz pump, also used in Waterway Executive Euro 2hp pumps used on Southwest, Sierra and other USA imported spas. This impeller was orignally used on Australian spas with Waterway pumps fitted with smooth Magnetek motors in 99-2000. 13mm vane width x 6 vanes, 115mm diameter. Marked 4hp in suction throat on most but not all. Price: AUD QTY:

	ww 310-4180 Waterway 2hp (1.5-1.8kw) executive pump impeller(5hp USA) The hp rating listed is actual horsepower.Some manufacturers label pumps with BHP (brake Horsepower) In the case of a 2hp pump, they are sometimes labelled 5hp. If in doubt, read the motor rating label, and email with details 15.5mm vane width x 6 vanes, 115mm diameter. Marked 5hp in suction throat on most but not all. Price: AUD QTY:

	ww 310-4300 Waterway 3hp Euro executive pump impeller OBSOLETE - Replaced by 310-2440 listed below Suits Waterway Executive 3hp pumps sold on Australian spas such as Heritage, Sapphire, Maax, Lanark and others as well as Waterway Executive Euro 3hp Pumps supplied from USA used on LA Spas and others 11mm vane width x 5 vanes, 133mm diameter. Not marked in suction throat. AUD Use 310-2440 Below

	ww 310-2440 Waterway 3hp Euro (2.2kw) Executive Pump Impeller Suits Waterway Executive 3hp pumps sold on Australian spas such as Heritage, Sapphire, Maax, Lanark and others as well as Waterway Executive Euro 3hp Pumps supplied from USA used on LA Spas and others 11mm vane width x 5 vanes, 123mm diameter. Either a red dot or not marked in suction throat. Price: AUD QTY:

	ww 310-1750 Waterway Executive Pump Wet End Complete Complete wet end (all sizes available 56 Frame) To replace - Simply wind impeller onto the motor shaft without dismantling wet end and do up the 4 mounting bolts. 1.75hp / 2hp Southwest/Sierra (4hp USA) wetend utilises a 2.5" pump suction faceplate available seperately additional to this wetend below (alternatively - reuse your existing 2.5" faceplate.) Older Australian supplied 2hp pumps utilised 4hp USA wetends with 48 Frame volutes - Use the new 2hp (5hp USA) impeller with seperate volute and faceplate components in this category to make up a wet end. Price: AUD QTY: HP Rating Please Select From List Below 1.0hp (Workman) 1.5hp (3hp USA) 1.75hp or 2hp - Southwest/Sierra Spas only (4hp USA) 2.0hp (5hp USA) 3.0hp (Oz only) Motor Frame Size Please select from list below 48 Frame 315-1240 56 Frame 315-1220

	ww 311-1220 Waterway Executive Pump Faceplate 2" Suction Front pump face with 2" Suction and drain plugs (8 screws hold it on) Does not include o rings or plugs Price: AUD QTY:

	ww 311-1210 Waterway Executive Pump Faceplate 2.5" Suction Front pump face with 2.5" Suction (larger than discharge union) and drain plugs (8 screws hold it on) Does not include o rings or plugs Used on early Waterway Executive pumps and new Southwest Spas / Sierra Spas Price: AUD QTY:

	ww 805-0261 Waterway Executive Pump Body O-ring Main o-ring seal around pump face Price: AUD QTY:

	ww 315-1220 Waterway Executive Pump Volute Pump Housing - the pump faceplate bolts to it Please select Motor Frame size from drop down list 48Fr - usually a magnetek smooth motor, mainly on pre-2001 pumps Measurement diagonally between motor mounting studs - 131mm 56Fr - usually an EMG finned motor used since 2000 Measurement diagonally between motor mounting studs - 147mm Price: AUD QTY: Motor Frame Size Please select from list below 48 Frame 315-1240 56 Frame 315-1220

	ww 319-1380 Waterway Executive Pump 1.5hp (1,2,3HP USA) Wear Ring Wear ring for 1.5hp waterway pump (impeller marked as 3hp) Price: AUD QTY:

	ww 319-1370 Waterway Executive 2hp & 3hp (4, 5 HP USA) Pump Wear Ring Wear ring for Waterway Executive 2 & 3hp wet end -( impeller may be marked 5hp or 3hp) Price: AUD QTY:

	ww 310-6700 Waterway 6" Workman Pump Leaf Trap Screws onto Waterway Workman and Executive series pumps for in ground applications were pump is above water level (may require removal of filter basket for pumps 2hp and above) Price: AUD QTY:

	ww 400-5571 Waterway Pump Union 2" Standard suction/discharge union on Waterway Executive pumps Price: AUD QTY:

	ww 400-4300 Waterway Pump Union 2" - 45 degree Ell 2"Spg Price: AUD QTY:

	ww 400-5800 Waterway Pump Union 2" 90 Degree Sweep Ell 2"S Price: AUD QTY:

	ww 400-5991 Waterway Pump Union 2.5" Suction If the front suction union nut is larger than the discharge union nut, it will be this type - found on early Waterway Executive pumps with Century Magnetek motors used on Maax, Lanark and other spas. Also found on 2001 Arctic Spas, and current model Southwest Spas Price: AUD QTY: