Spa Cover Lifters - Spa cover removal systems and re-fitting aids

Enable one person handling of spa covers even on the biggest spas, with ease

Spa Cover Lifters - Aid in the removal and refitting of spa covers without risk of abrasion damage on the ground. Especially suited to spa users on their own - easy one person operation. There is a variety available to suit your application, including in-deck spas where there is no room down the side of the spa cabinet.
Some models suit almost all spa shapes, others are not suitable, such as installation on spas with large radius corners or hexagonal, or round in shape.

We encourage proper handling of your cover and lifter to prolong the life of both accessories.
Many cover lifter suppliers and instruction manuals will state operation of the lifter with one person at the side of the spa - whilst this is satisfactory for some situations, we believe it best to operate the lifting system from within the spa at the centre of the cover to spread the load and stress evenly. Warranty on our lifters does not cover damage as a result of incorrect lifting procedures.

The correct method of use for all cover lift systems -

Fold the cover on itself, climb into the spa - from the centre of the cover, push back and up to lift the cover evenly until its final position is reached. Replacing the cover should be a reversal of this procedure. Any other single person operation may result in cover lift system failure or damage.

BUY A SPA COVER AND SPA COVER LIFTER ON THE SAME ORDER - RECEIVE A 15% DISCOUNT OFF THE SPA COVER LIFTER !

	cover caddy Cover Caddy Spa Cover Lifter Cover Caddy spa cover lifter for easy storage whilst using the spa Requires 500mm-600mm clear space to rear of spa Cover Caddy is gas strut assisted and lowers cover to vertical position once cover is slid back into its cradle For use on all shape spas - square, rectangular, octagonal, hexagonal, etc. Can also be used on ROUND spas / hot tubs with additional timber packing. In stock now                    Price: AUD QTY:

	sd 6472-673 SunLift Sundance Spas Cover Lifter Made for Sundance Spas - Heavy Duty - available in Coastal Grey colour to match cabinet and cover. Gas strut assisted for easy lifting The perfect spa cover lifter for in ground, in deck or where there is no room behind the spa to lower a cover over the side with other lifters or manually. One left. Price: AUD QTY: Colour Please select from list below Sierra - Redwood Coastal - Grey

	ideal econolift Ideal Econo Lift Spa Cover Lifter - Top Mount Hydraulic Lift Gas strut assisted spa cover lift - universal mounting design - onto deck or side of spa cabinet - suits square / rectangular spas installed in any manner - no rear clearance required. Provides a privacy screen / wind break as well. Two sizes available - up to 2100mm, and up to 2400mm. Maximum spa cabinet corner radius of 250mm. In stock now      Price: AUD QTY: Spa Width Please Select From List Below Up to 2100mm Over 2100mm, up to 2400mm

	cover genie Cover Genie Spa Cover Lifter Cabinet mounted spa cover lift that can be fitted at varying height allowing a lower cover position when open, or higher depending on surrounds and result desired. Powder coated steel, 300mm rear clearance required.  In stock now     Price: AUD QTY:

	icon image Icon Image Spa Cover Lifter - Bottom Mount Lift Economical spa cover lifter - suited to square and rectangular spas. Foot assist bar, powder coated steel - suits spas up to 2400mm wide, requires 450mm rear clearance. In stock now      Price: AUD QTY:

	cover saver Cover Saver - Spa Cover Lift Accessory An optional extra - the Cover Saver - for use with cover lifters with a bar across the centre only. Designed to alleviate the stress of the cover lifter bar on the centre seams of the cover vinyl to prolong life. The cover saver uses a plastic T-bar to support the cover weight, held with webbing straps to the cover lifter bar - adjusted to hold the cover just above the cover lifter bar in the open position. 156mm long overall x 77mm wide Price: AUD QTY:

	sd 6000-235 / 243 Sundance Spa Cover Breeze / Cover Valet Gas Strut Pair Gas struts to suit Cover Valet and Sundance Spas Cover Breeze spa cover lifters - 7' version 2 x struts (one with latching mechanism) Price: AUD QTY: