Spa light fittings and parts

	arcticlt Arctic Spas 12" Light Housing less reflector Arctic Spas 12" light housing less reflector - Arctic Spas logo on face of lens. 235mm diameter. 195mm hole size required. Price: AUD QTY:

	arts-armb25-400 Plastic Acrylic Clear Bubble Bar 1" / 25mm Spa Handrail Grab bar - 400mm - Suits LED & Fibre Optic Lighting - Awesome Bubble Lighting Effect Bubble Bar - Clear Acrylic 1" / 25mm spa handrail grab bar 400mm long with fine champagne style bubbles though the bar to provide awesome lighting by standard lamp, LED or fibre optics or still looks great without illumination. See Light category for lamp holders Image shown - illuminated by an O'Ryan Starbar Lamp Holder and Red Lens with GE918 7w lamp - these parts available in the Lights category. Similar effect achieved with fibre optics and LED lighting. Price: AUD QTY:

	or tub O'Ryan Timber Hot Tub Light Fitting Brown spa light fitting suitable for use in timber hot tubs with thick walls. Accomodates standard or LED lamps. Must be installed above ground. Rear of housing should be weather protected. Light globe / cable harness / globe holder assy should be purchased seperately. Hole size required - 60mm Price: AUD QTY:

	ww 675-4008l Waterway 6" Clear Aquafalls - LED Spa Waterfall Clear Aquafall waterfall for spas - Designed for LED or fibre optic illumination - particularly suited to the Sloan Led System - accomodates 4 x multicolour LED's. 25mm/1" socket water inlet Faceplate - 205mm x 28mm, 170mm x 15mm slotted hole size required Body protrudes 70mm on underside of spa Same design as grey waterfall above. Pictured with seperately available 4 LED cable assembly from Sloan LED system glowing blue/green Price: AUD QTY:

	or p0300 O'Ryan Starbar Light Lamp Housing Slip fit over 25mm & 1" diameter Starbar, Clear, and Bubble Bar - requires 10mm of protruding bar. 54mm overall length, accepts standard bayonet twist wedge style lamp holder Complete with coloured lens kit listed below. Price: AUD QTY:

	or p0300l O'Ryan Starbar Coloured Lens Kit 5 lens kit - blue, green, amber, pink, red 25mm diameter Price: AUD QTY:

	or l0054 O'Ryan Starbar LED Adaptor Slip fit over 25mm & 1" diameter Starbar, Clear, and Bubble Bar - requires 10mm of protruding bar. (Shown fitted to a Starbar with Starburst LED lamp) Accepts Starbust 10 LED lamp Snchronises with your other LED lighting Can also be used in conjunction with the Sloan LED system Price: AUD QTY:

	or sb16 StarBar Plastic Acrylic 1" / 25mm Spa Handrail Grab bar - 400mm Original O'Ryan StarBar - Opaque Plastic Acrylic 1" / 25mm spa handrail or grab bar for standard lamp, fibre optic and LED lighting - used on numerous spas including Signature Spas and Arctic Spas - 400mm length The lightly scuffed surface, which also makes the bar opaque, is designed to 'pick up' the light as it passes through the bar to evenly illuminate its full length. Totally clear bar tends to allow most light to pass straight through with less sideways illumination. Price: AUD QTY:

	arts-arm25 Clear Bar Plastic Acrylic 1" / 25mm Spa Handrail Grab bar to suit LED / Fibre Optic Lighting - 400mm Clear Acrylic 1" / 25mm spa handrail or grab bar for standard lamp, fibre optic and LED lighting - used on numerous spas - 400mm length - other length available on request. Pictured, illuminated with Starbar Lamp Holder and amber coloured lens. Can also be fitted for fibre optics and LED lamps. Also looks great without lighting. Price: AUD QTY:

	bel 39-2sp2 PAL 2000SP Hot Tub Spa Light Fitting Timber hot tub spa light fitting suitable for above ground, and in-ground spas (rear of light fitting is fully waterproof preventing moisture and contaminents entering from surrounding soil) Supplied with 12v, 20w Xenon high output, 5,000 hr lamp, transformer and 5m lead/plug. Any of the MR16 LED lamps listed under the Light category can be fitted to this hot tub light. 84mm diameter face, 50mm hole size, suits up to 50mm wall thickness (ideal for hot tubs) Price: AUD QTY:

	ww 633-7078 Waterway 1/2" Faceted LED Light Fitting Waterway 1/2" clear faceted light fitting - suits Sloan LED system multicolour LED illumination Designed for installation above water line  13mm / 1/2" diameter, requires a 10mm hole Pictured with Sloan 1 LED cable glowing green Price: AUD QTY:

	ww 633-7098 Waterway 1" Faceted LED Light Fitting Waterway 1" opaque faceted light fitting - suits Sloan LED system multicolour LED illumination Designed for installation underwater - complete with gasket 25mm / 1" diameter, requires a 15mm hole Pictured with Sloan 1 LED cable multicolour lamp glowing red/blue Price: AUD QTY:

	or p400 O'Ryan BabyStar Spa Light Fitting 60mm diameter face, 41mm hole required. Complete with coloured lens kit listed below Also houses the Starburst 10s LED lamp, and Colour Kinetic 7 LED lamp Price: AUD QTY:

	or p0400l O'Ryan BabyStar Coloured Lens Kit 5 lens kit - blue, gree, amber, pink, red Clips over BabyStar Light Housing 64mm OD x 61mm ID Price: AUD QTY:

	ww 630-6005 Waterway 3.5" Front Access Light Fitting 81mm D light fitting. 2 5/8" / 65mm hole size required. Lamp can be removed from inside the spa once drained or from under the spa if accessible. Comes with red and blue lens, tool to undo lens. No lamp, cable or transformer included, suits system with 12V AC supply and light cable already, such as Gecko packs Originally designed to suit 2 1/2" hole size but recently changed to suit common jet hole sizing Price: AUD QTY:

	ww 630-5105 Waterway 3.5" Light Fitting 81mm D, 2 5/8" / 65mm hole required, comes with red and blue lens, 12W lamp and light cable/socket Transformer or 12V AC supply required in addition Originally designed to suit 2 1/2" hole size, however changed recently to match common jet hole sizing Price: AUD QTY:

	ww 630-K005 Waterway 5" Jumbo Light - diffused Light Fitting 125mm OD x 95mm / 3 3/4" hole size Large diffused spa light with red and blue lens Perfect for multicolour lamps due to diffuser. Does not include lamp, cable or transformer - suits Gecko systems, or buy other components extra Price: AUD QTY:

	o 1020000 Onga Dega Delite Spa & Pool Light and Transformer Kit - Complete OBSOLETE - call to discuss replacement options Onga Dega Delite spa and swimming pool underwater light 12v, 36w output - complete with transformer and red, blue & green coloured lenses Overall diameter - 176mm without coloured lens Hole size required - 80mm Fixing - 6 stainless steel bolts (supplied) Cable entry/seal requirements - the rear of the light housing has a 15mm / 1/2" Spigot fitting - glue an elbow or fitting onto this spigot and with 15mm / 1/2" pipe, extend above water level and plumb to transformer. Globe assembly held in place by 3 plastic cam-lock screws - twist 90 degrees to unlock and extract globe. Ensure enough wire is left behind the light to enable removal above water level. AUD Sorry ..... Obsolete!

	ww 611-4310 Fibre Optic Light Lense - Faceted FiberLite Fibre Optic cable receptacle with a faceted face for light diffusion - accomodates 1-3 strands Used extensively on LA Spas and some others including Maax Spas. Can be easily added to any spa Price: AUD QTY: