Sundance Spas electrical and electronic components - heaters, topside panels, circuit boards, ozone generators, lights, and more

	l 68219 Laing Thermotech 88w Seal-less Centrifugal Canned Motor Spa Circulation Pump - SM-959-NH-26 Limited to stock on hand - new E-10 pump below supercedes this pump New design wet end 2007. Laing Sealless centrifugal canned motor pump SM-959-NH-26 plastic housing. Magnetic driven circulation pump - duty rated (24hr) 88W power rating - 1/20th HP. 30lpm maximum flow. Fitted with mini JJ plug/cord Can be used in all circulation filtration, heating and ozone applications 3/4" barb connection Max. fluid temperature - 60 degrees C / 140 degrees F Mounting - new design wet end with plastic mounting feet arrangement allows for universal mounting positions - horizontal, vertical or every 45 degrees, (vertical with motor at the bottom - no other angles are permitted). 1 year warranty Used on numerous brands of spas with various names - Silent Flo 5000 ( Hot Springs Spas ), Dimension One Spas, LA Spas, Sundance Spas, Southwest Spas, Sierra Spas and many others 220-240v, 0.9A, 50Hz, 30 lpm, less than 30db noise level. Note - Dry running (insufficient water) will result in pump failure due to overheating the impeller bearing/seal system which relies on water for lubrication. Warranty does not cover this event. Ensure water flows after initial installation, after refilling, and after filter cleaning. If not, clear the air lock by loosening the tubing connected to the pump until water leaks out. Retighten and check flow. Laing Circulation Pump Installation & Operating Manual AUD Use L P3020 Below

	l p3020 Laing Thermotech E-10 Circulation Pump 3/4" Barbed - Mini JJ Cordset Laing Thermotech E - 10 electronically commutated canned spherical motor centrifugal spa circulation pump 60 lpm flow maximum, 6.5m head maximum (double the flow of the standard l 68219 pump listed below) 3/4" barb connections E-10-NSHN2W-20 4' TSP-103L 230v, 0.3A, 70w, 50/60Hz, 3200 rpm, less than 40 db noise level 4 ft Mini JJ Cordset fitted. Price: AUD QTY:

	sd 6500-303 Sundance Spas 2.7 kw Heater to 2000 Price: AUD QTY:

	sd 6560-012 Sundance Spas Heater Foam Insulating Wrap Single sided sticker - wraps around and sticks to metal heater tube above Price: AUD QTY:

	sd 6500-315 Sundance Spas 2.7 kw Heater - Plastic 2001+ Price: AUD QTY:

	sd 6500-062 Sundance Spas 2.7 kw Circulation Heater - Portafino Series Circulation system trombone shaped heater used on Sundance Portafino series spas. Includes auto reset high limit and threade pressure switch port. 3/4" barbed. 2.7kw, 11.3A, 240v Truheat SJB. Sundance Spas p/n 6500-062, Truheat p/n. C3226-2 Price: AUD QTY:

	sd 6472-676 Sundance Spa 24 LED Multicolour lamp Sundance Spas 24 LED lamp with colour washing and numerous solid colours available Price: AUD QTY:

	sd 6472-677 Sundance Spas 24 LED All Blue lamp Sundance Spas 24 LED lamp - ALL LED's are Blue for ultra bright Blue light (the most popular colour) Other LED lamps can only illuminate 8 blue LED's instead of 24 Price: AUD QTY:

	sd 6472-635 Sundance Spas Sunzone UV Ozone generator NO LONGER AVAILABLE COMPLETE - ALL PARTS ARE AVAILABLE Sundance Spas Ultra-violet ozone generator designed for 24 hr operation with circ pump Sundance Spas parts must be Sundance branded to maintain warranty and proper operation UPGRADE to CD Sunzone ozone generators below. AUD No Longer Available

	sd 6473-124 Sundance Spas Sunzone CD Ozone Generator 50-150mg/hr Standard 50mg/hr CD Sunzone Ozonator - higher and far more consitent output than UV Sunzone model. 240v, 50/60Hz Price: AUD QTY:

	sd 6473-125 Sundance Spas Sunzone CD Ozone generator 300mg/hr Higher output corona discharge ozone generator suitable for spas with higher use and reduced chemical requirements - 300mg/hr Sundance Spas parts must be Sundance branded to maintain warranty and proper operation 240v, 50/60Hz Price: AUD QTY:

	sd 6600-807 Sundance Spas 850 Series Control Panel (Dual Harness) 1995-99 Price: AUD QTY:

	sd 6600-863 Sundance Spas Remote Control Panel 1995-99 Price: AUD QTY:

	sd 6600-839 Sundance Spas 850 Series Control Panel (Dual Harness) 2000 Price: AUD QTY:

	sd 6600-831 Sundance Spas Remote Control Panel 2000 Price: AUD QTY:

	sd 6600-111 Sundance Spas 850 Series Circuit Board Rev. 2.50H 1995-2000 Used from 1995 - 2000 Eprom marked 2.50H Replaces all circuit boards preceding this revision. (All boards with 2.50A through to 2.50G - also replaces 6600-109) Price: AUD QTY:

	sd 6600-072 Sundance Spas 850 Series Circuit Board Rev. 2.50L 2001+ Used from 2001+ Eprom marked with 2.50L Price: AUD QTY:

	sd 6600-055 Sundance Spas 600 / 650 Series Circuit Board Rev. A DXP1-1A DXP 2-1A 1995-97 Used from 95-97 on 600/650 1 pump systems with 2 x Pal chips marked DXP 1-1A and DXP2-1A Also retrofits 1995 400 series spas and older 6600-033 & 6600-043 boards. Price: AUD QTY:

	sd 6540-228 Sundance Spas Temperature Sensor O-Ring Price: AUD QTY:

	sd 6600-167 Sundance Spas Temperature Sensor Price: AUD QTY:

	sd 6600-168 Sundance Spas High Limit Sensor Price: AUD QTY:

	sd 6560-860 Harwil Q-12DS-C2 Low Flow Spa Flow Switch Flow switch designed for use with low flow circulation pumps Extra low voltage only 3/4" barb tee body Used on Sundance Spas, LA Spas, Hot Spring Spas, and others using low flow circulation pumps for heating circulation Price: AUD QTY:

	sd 6660-192 Sundance Spas Terminal Block - 2 Position with Spade Terminals Price: AUD QTY:

	sd 6560-016 Sundance Spas 4 Position Terminal Strip - Heater Circuit board heater fingers terminate onto this terminal strip on 850 series spas up to 2002 Price: AUD QTY:

	sd 6660-055 Sundance Spas 14 Pin Sensor Harness Connector Block Price: AUD QTY:

	sd 6660-060 Sundance Spas Box End Connector Pin Box End connector - Suits sensor harness connector listed above - used on all sensors - flow switch, hi-limit and temperature sensor Price: AUD QTY:

	sd 6660-264 Sundance Spas Eprom Chip 2.50H This Sundance Spa eprom chip upgrades all previous eprom versions to allow full spa function. Eproms 2.50B-2.50G do not allow simultaneous operation of both pumps, blower and heater. 2.50H eprom allows simultaneous operation of all of the above, or without heater. Power supply required for full operation on all models except 3 pump Maxxus - 32A, 240V, 50Hz. in Australia. Price: AUD QTY:

	sd 6660-266 Sundance Spas PCB Eprom 2.50HL This eprom chip suits all Sundance Spas 1995-2000 circuit boards. It changes the light funcion to ON/OFF to allow the installation of the new Multicolour LED lamps. It also changes the Blower control to single speed only. All other functions remain the same - some filter cycle changes to earlier models. See Sundance LED lamps in the Lights Category. All newer spas are LED lamp ready with a circuit board Jumper Setting change. Price: AUD QTY:

	sd 6660-039 Sundance Spas Power Transformer Sundance Spas power transformer 240v input, 10v / 14v outputs. Red, black in, 2 x yellow, 2 x blue out Generally mounted behind circuit board control box. Price: AUD QTY: