Air Injectors specific to spa baths - include internal non return check valves - not suitable for spa pools / hot tubs

	e 2001-ch Edgetec Spa Bath Air Injector - Chrome Edgetec spa bath air injector - chrome 27.3mm diameter cap, 16mm hole size required Fitted with a small rubber check valve under the cap to limit water backflow into airlines Price: AUD QTY:

	e 2001-ch cap Edgetec Spa Bath Air Injector Cap Only - Chrome Edgetec spa bath air injector cap - chrome 27.3mm diameter cap clips over the air injector body, which has a diameter of 23mm Price: AUD QTY:

	e 2001-wh cap Edgetec Spa Bath Air Injector Cap Only - White Edgetec spa bath air injector cap - white 27.3mm diameter cap clips over the air injector body, which has a diameter of 23mm Price: AUD QTY:

	o 8044600 Onga Air Master Spa Bath Air Jet - White Onga spa bath air injector with check valve and spring - clip on white cap 28mm cap diameter, 8 x slots - very slightly curved top - no bevelled edge 23mm body lip diameter (with cap removed), 16mm hole size Price: AUD QTY:

	o 8044603 Onga Air Master Spa Bath Air Jet - Chrome Onga spa bath air injector with check valve and spring - clip on chrome cap 28mm cap diameter, 8 x slots - very slightly curved top - no bevelled edge 23mm body lip diameter (with cap removed), 16mm hole size Price: AUD QTY:

	o 8110100 Onga Air Master Air Jet Cap Only - White 28mm cap diameter, 8 x slots - white - very slightly curved top - no bevelled edge Similar, but not compatable with S&P spa bath air jet listed below Price: AUD QTY:

	o 8110103 Onga Air Master Air Jet Cap Only - Chrome 28mm cap diameter, 8 x slots - chrome - very slightly curved top - no bevelled edge Similar, but not compatable with S&P spa bath air jet listed below Price: AUD QTY:

	wc asf668 S&P Waterco Spa Bath Air Jet - White Spa Bath air injector with spring check valve to prevent water back flow 28mm diameter cap, 16mm diameter hole size Suitable only for spa baths - NOT SUITABLE for spa pools Distinct bevelled edge on top of cap Price: AUD QTY:

	wc ac1144 S&P Waterco Spa Bath Air Jet - Cap Only - White S&P air jet cap - 28mm diameter cap, Distinct bevelled edge on top of cap Price: AUD QTY:

	wc asf670 S&P Waterco Spa Bath Air Jet - Chrome Spa Bath air injector with spring check valve to prevent water back flow 28mm diameter cap, 16mm diameter hole size Suitable only for spa baths - NOT SUITABLE for spa pools Distinct bevelled edge on top of cap Cap only - not available - must buy complete air jet Price: AUD QTY:

	wc asf618 S&P Spa Bath 18 Air Injection Kit - White Convert your bath or hydro spa bath to include an air injection system with this kit Includes 18 x wcasf668 white air injectors listed above, 18 port manifold, check valve, 10m x 3/8" hose. All you need to add is an air blower and pipe from check valve to air blower. A loop and drain must be installed to ensure blower protection from flooding. Price: AUD QTY:

	wc azsf923 S&P Spa Bath 18 Air Injection Kit - Chrome (with supports) Convert your bath or hydro spa bath to include an air injection system with this kit Includes 18 x wcasf670 chrome air injectors listed above, 18 port manifold, check valve, 10m x 3/8" hose. Also included with this kit are 3 support brackets and adjustable legs to raise spa bath to enable installation of air injectors in the floor without additional framing. All you need to add is an air blower and pipe from check valve to air blower. A loop and drain must be installed to ensure blower protection from flooding. Support brackets - 520mm long Price: AUD QTY:

	wc 4402050 Senex Air Injector Cap - White Senex white Spa bath air injector cap - threaded with 4 channels. 25.7mm diameter cap, 12mm diameter thread, 6mm thread length. (the same injector cap was also made with approx double the thread length, but is no longer available. This cap replaces those also) Price: AUD QTY:

	wc 44020501 Senex Air Injector Cap - Almond Ivory Senex almond ivory Spa bath air injector cap - threaded with 4 channels. 25.7mm diameter cap, 12mm diameter thread, 6mm thread length. (the same injector cap was also made with approx double the thread length, but is no longer available. This cap replaces those also) Price: AUD QTY:

	wc 4402051 Senex Air Injector Cap - Chrome Senex chrome Spa bath air injector cap - threaded with 4 channels. 25.7mm diameter cap, 12mm diameter thread, 6mm thread length. (the same injector cap was also made with approx double the thread length, but is no longer available. This cap replaces those also) Price: AUD QTY:

	o 8110104 Onga Air Master Air Jet Cap Only - Gold 28mm cap diameter, 8 x slots - gold - very slightly curved top - no bevelled edge Similar, but not compatable with S&P spa bath air jet listed below Price: AUD QTY:

	wc 4403005 Senex Air Injector Internal Non-Return Valve Cartridge These brass cartridge check valves slip down inside Senex spa bath air injectors to prevent back flow of bath water in air lines. They can become corroded, fouled and stuck, requiring cleaning or replacement. Price: AUD QTY:

	wc 4403002/4403012 Senex Air Injector Jet Body (with valve) and injector Tee - Brass Brass air injector with spring check valve - tee fitting - 1/2" / 13mm barb Designed to allow multiple injector hook up off the one hose - up to 4 injectors per hose (3 tee, 1 elbow). Special 4 port manifold with 1/2" barbs, and 1/2" / 13mm hose available for these jets Hole size required - 14mm Price: AUD QTY:

	wc 4403002/4403010 Senex Air Injector Jet Body (with valve) and Injector Elbow - Brass Brass air injector with spring check valve - elbow fitting - 1/2" / 13mm barb Designed to allow multiple injector hook up off the one hose - up to 4 injectors per hose (3 tee, 1 elbow). Special 4 port manifold with 1/2" barbs, and 1/2" / 13mm hose available for these jets Hole size required - 14mm Price: AUD QTY:

	wc 4409001 Senex Air Injector Valve Cartridge Extractor Tool Special extraction tool to remove the internal non return check valves in Senex spa bath air injectors. To use - unscrew top cap - insert tool and screw into valve body - simply pull out to extract - clean or replace the valve - replace the cap. Price: AUD QTY:

	sty7405/7413 Stylus Air Force Spa Bath Air Injector Cap & Rubber Valve - White 30mm diameter face Secures to spa by pushing into injector body with rubber valve fitted over cap pin. Available as replacements or upgrade to chrome or gold Price: AUD QTY:

	sty 7402 / 7413 Stylus Air Force Spa Bath Air Injector Cap & Rubber Valve - Chrome 30mm D cap - upgrade to chrome! Price: AUD QTY:

	sty gld / 7413 Stylus Air Force Spa Bath Air Injector Cap & Rubber Valve - Gold 30mm D cap Price: AUD QTY:

	sty 7412 Stylus Air Force Spa Bath Air Injector Body / Manifold Stylus Air Force Spa Bath Air Injector Body - For replacement only - For use on existing Stylus Air Force fitted spa baths only Brass threaded fitting with hex key hole, into PVC base 15mm / 1/2" socket air connection. Price: AUD QTY: