Timber Hot Tub and Marble Spa Jets and Fittings including Strip Skimmers, Suctions and Air Blower Loop Wall Fitting Assemblies & Lights - with longer wall fittings to suit thick cedar and marble walls - spas,spa pool, hot tub, jacuzzi
Because most timber tubs and marble baths have wall thicknesses up to 1.5" or 40mm (the vast majority of spa jets which are designed for 3-15mm thick acrylic spa shells), they require specially built jets with extended threaded wall fittings. Unfortunately, availability and variety of these jets is declining with the increased popularity of acrylic portable spas.
Listed here are the only available Hot Tub specific fittings available. Not all will suit every application.

	hai hottubjet Hydroair Hydro Jet Hot Tub Spa Jet The only available Timber Hot Tub Jet for thick wall applications Suits Marble and Timber Tubs 60mm D hole required, up to 45mm timber or marble thickness 1.5" / 40mm water x 1.5" / 40mm air, Air can also be perpendicularly installed 1/2" / 15mm pipe. Price: AUD QTY:

	55-471-1000 Hydroair Carousel Rotating Eyeball - Polaris 3-1-1 Carousel rotating eyeball - 1.5" threaded - spa or pool jet return Mechanically driven by water flow - geared spocket drive. 51mm diameter, 47mm diameter thread (1.5") Will fit any pool or spa return / jet with a 1.5" thread. Suits Hydroair Hydrojets. Upgrade from standard directional eyeballs. Price: AUD QTY:

	ww 215-1760 Waterway Poly Jet Extended Wall Fitting Longer than normal wall fitting to accomodate thicker wall - maximum thickness approx 32mm Price: AUD QTY:

	ww 210-5880 Waterway Poly Jet Body 3/4"x3/8" RB 65mm hole required 3/4" x 3/8" hose connections Price: AUD QTY:

	ww 210-6040 Waterway Poly Jet Internal - Adjustable Most suitable jet internal for hot tubs due to the depth of the body. Other standard poly jet internals can be used. The deluxe range is not suitable due to the depth of the body. Price: AUD QTY:

	haiblloopfitt Hydroair Hot Tub Air Blower Loop Wall Fitting Hydroair Hot Tub Spa Air Blower Loop Wall Fitting Assembly Hole size required - 60mm D Designed for 40mm / 1.5" pipe to loop around the hot tub, usually under the seat, drilled for air blower injection. Extended wall fitting suitable for tub or marble wall thickness up to 45mm Standoff Distance - from timber tub wall to outside of the loop pipe - as little as 50mm. 50mm, 90 degree Ell body, internal Tee assembly threads into hot tub wall fitting for easy installation and service. Simply plumb a loop of pipe around the tub from one end of the Tee to the other, and drill out the loop to suit. Price: AUD QTY:

	hai 10-6839 Hydroair High Volume Hot Tub Spa Suction Only available Timber Hot Tub suction fitting with long wall fitting 60mm D hole size, up to 45mm timber thickness Price: AUD QTY:

	hai 10-6806 Hydroair High Volume Suction Cover Only - Threaded Screws into Hydroair Suction wallfitting 1.5" NPT thread - held in place with supplied screw. 100mm diameter. Flow rate - 80 GPM Price: AUD QTY: Colour Please select from list below White Grey

	hai 10-6539 wht Hydroair Strip Skimmer Assembly - Hot Tub - White Especially designed for use on marble and timber hot tubs with extra thick walls Surface strip skimmer which compises seperate wall fitting and cover grill. The grill is held in place by the top screw and the threaded perferated insert. 266mm high, 101mm wide, 25mm deep. Requires hole size - 60mm 90 degree elbow 1.5" / 40mm socket connection Maximum wall thickness - 40mm Price: AUD QTY:

	bel 39-2sp2 PAL 2000SP Hot Tub Spa Light Fitting Timber hot tub spa light fitting suitable for above ground, and in-ground spas (rear of light fitting is fully waterproof preventing moisture and contaminents entering from surrounding soil) Supplied with 12v, 20w Xenon high output, 5,000 hr lamp, transformer and 5m lead/plug. Any of the MR16 LED lamps listed under the Light category can be fitted to this hot tub light. 84mm diameter face, 50mm hole size, suits up to 50mm wall thickness (ideal for hot tubs) Price: AUD QTY:

	or tub O'Ryan Timber Hot Tub Light Fitting Brown spa light fitting suitable for use in timber hot tubs with thick walls. Accomodates standard or LED lamps. Must be installed above ground. Rear of housing should be weather protected. Light globe / cable harness / globe holder assy should be purchased seperately. Hole size required - 60mm Price: AUD QTY:

	wc ultratubbr S&P Ultra Hot Tub Spa Jet - Brown OBSOLETE 76mm diameter face, 48mm hole required. Suits timber or marble up to 50mm thick 40mm water x 15mm air AUD Sorry ... Obsolete!

	wc turbotub S&P Turbo Hot Tub Spa Jet Limited stock in brown and white. 3 x brown, 3 x white left Price: AUD QTY:

	wc turbowf S&P Turbo Hot Tub Spa Jet Wall Fitting Convert a standard S&P Turbo jet into a Hot Tub jet with this wall fitting. AUD Sorry ... Obsolete!