Hydroair Spa Jets for spas and spa bath

Jet internal barrels of the same model are interchangeable - eg Magna directional, single port, and dual port, are all able to be installed in the same jet body - you are not restricted to exactly the same jet internal when replacing - why not upgrade!

	54-470-2300 Hydroair VSR jet - old style - complete 112mm D, 85mm hole required, used on Blue Moon Spas, Palm Spring Spas. Not the same body size for Sundance Spas Price: AUD QTY: Colour Please select from list below White Grey

	55-470-2514 Hydroair VSR jet - old style - roto internal Select colour required Suits old style VSR jet - Used on Sundance Spas, Palm Spring Spas, Palm Beach Spas, Blue Moon Spas, and others Sundance Intellijet from 94-97 have a slightly different nozzle appearance, and are listed under Sundance Spas Parts Price: AUD QTY: Colour Please select from list below White Grey

	55-470-2505 Hydroair VSR Old Style Nozzle Cone / Bearing Shroud Seated loosly behind the VSR roto internal shown above. Concentrates water flow through nozzle. Price: AUD QTY:

	hai vsrbearing Hydroair VSR jet - bearing Jet internal Bearing Only If the jet stops spinning this may be all that you need 51mm OD x 31mm ID x 13mm thick Plastic bearing race w/ss bearings Price: AUD QTY:

	hai 16-5749 wh Hydroair VSR Whirlpool / Swim Jet Assembly w/ 3/4" nozzle - White Hydroair Swimjet or Whirlpool jet with a 3/4" / 20mm nozzle. 1.5" / 40mm Spg x 1/2" / 15mm S. 112mm D, 85mm hole required. Price: AUD QTY:

	hai 16-5759 gry Hydroair VSR Whirlpool / Swim Jet Assembly w/1" nozzle - Grey Hydroair Swimjet or Whirlpool jet with a 1" / 25mm nozzle. 1.5" / 40mm Spg x 1/2" / 15mm S. 112mm D, 85mm hole required. Price: AUD QTY: