Specific Concrete / Gunite jets for use in spray concreted swimming pools and spas

	ww 218-1890a Waterway Gunite Jet Measuring Tool - Suits Poly, Poly Storm, and Power Storm Jets Waterway Gunite / Concrete Jet measuring tool - suits Waterway Poly Jets, Waterway Poly Storm Jets, and Waterway Power Storm Jets. Also acts as a wrench for Poly Storm series only. Price: AUD QTY:

	ww 210-7830-co Waterway Poly Storm Gunite Jet Kit Complete - 'H' Body Concrete spa jet - air mixes from venturi at the jet nozzle, rather than back in the jet body. Allows the use of the full range of Poly Storm jet internals Includes USA 2.5" x 14" pipe section and 1" pipe section 2"S x 1.5"S water and air pipe connections Shown with optional twin roto jet internal sold seperately (many other internals available - see Waterway Polystorm Jet internals listed under Jets - Waterway - Storm Series) Kit comprises Poly Storm jet body, wall fitting, plaster niche, 2.5" pipe section, 1" pipe section. Only requires jet internal for complete system. Price: AUD QTY:

	ww 210-7820-co Waterway Poly Storm Gunite Jet Kit Complete - Straight Body Concrete spa jet - air mixes from venturi at the jet nozzle, rather than back in the jet body. Allows the use of the full range of Poly Storm jet internals Includes USA 2.5" x 14" pipe section AND 1" pipe section (not pictured) 1"S / 1.5"Spg straight water x 1/2"S / 1"Spg air pipe connections Kit comprises Poly Storm jet body, wall fitting, plaster niche, 2.5" pipe section, 1" pipe section. Only requires jet internal for complete system. This jet body design may be more installation friendly where jets are to be plumbed in close proximity to one another, where smaller air venturi pipes are desired,, or single air venturi controls per jet, or where freedom of plumbing is to be maximised. The plumbing to the jets can be directly into the rear of the jet, or from an elbow (45 or 90 ell), or a Tee as required. Plumbing for water is either 1" or 1.5" compared to the 2" plumbing on 'H' pattern bodies listed above. Air venturi plumbing is either 1/2" or 1" compared to 1.5" plumbing on 'H' pattern bodies. Shown with optional directional jet internal sold seperately (many other internals available - see Waterway Polystorm Jet internals listed under Jets - Waterway - Storm Series) Price: AUD QTY:

	ww 212-8050g Waterway Poly Storm Gunite Jet Internal - Directional - White Waterway Poly Storm Gunite jet internal barrel - adjustable directional - white Gunite internals have a butterfly valve on the rear for water flow control. (standard polystorm jet internals also fit, but have no water flow control) Price: AUD QTY:

	ww 212-8120g Waterway Poly Storm Gunite Twin Roto Jet Internal Waterway Poly Storm Gunite concrete spa jet internal barrel with butterfly valve insert. Gunite Poly Storm jets are fitted with a butterfly insert in the rear to allow water flow regulation with a twist of the jet face. These differ from the standard Poly Storm jet internals which are not fitted with this insert. Standard Poly Storm inserts can still be used in the Gunite jet but are unable to be turned off or flow adjusted - just full flow. Price: AUD QTY:

	ww 212-8030g Waterway Poly Storm Gunite Jet Internal - Massage - White Waterway Poly Storm Gunite jet internal barrel - Massage - white Gunite internals have a butterfly valve on the rear for water flow control. (standard polystorm jet internals also fit, but have no water flow control) Price: AUD QTY:

	ww 210-3257 Waterway Handheld Spa Jet - Pulsator - Poly Storm - Grey Handheld Twin Spinning Pulsator Jet with flexible tubing for body massage - fits all Waterway Poly Storm Bodies Simply remove existing Poly-Storm jet internal and temporarily install this handheld jet. Found on many Australian and USA made spas such as Maax, Lanark, Heritage, Sapphire, Enguard, AAIM, Freedom, and many others - also suits Waterway Poly Storm Gunite concrete spa jets. Poly Storm jets are 85mm diameter across the face Price: AUD QTY: