Spa Builders Systems Group electronic control system components and parts for LX series spa and hot tub controllers such as LX - 10, LX - 15, LX - 20, LX - 25 and LX - 30 used in various spas and hot tubs including Australian built Palm Springs Spas, and Bullfrog Spas.
The majority of parts are universal, however the circuit boards are designed for Australia and Europe with 240v / 50Hz power supply (many will work on 220v, 60Hz - they can also run on 110v with correct transformer)

See also - Gecko Electronics subcategory - Spa Builders also manufacture Gecko SSPA & MSPA spa packs in white metal casings labeled S-Class & M-Class. All Gecko products are cross compatable.

	sb 3-00-0009 Spa Builders / Ramco ST 1200/4 Topside Touchpad Spa Builders / Ramco ST 1200/4 touchpad with 4 buttons and mechanical capillary thermostat. 6 pin plug. Used on AP-1 control systems and others. In Australia - usually fitted with 9 pin plug - in which case the 9 to 6 pin adaptor listed below is also required. Price: AUD QTY:

	sb 5-60-0002 Spa Builders / Ramco 9 to 6 Pin Adaptor Cable - Suits ST 1200 Topside Touchpad Spa Builders / Ramco 9 to 6 pin touchpad adaptor cable. Price: AUD QTY:

	sb 3-00-0190 Spa Builders LX - 15 Topside Touchpad Panel Used on Australian built Palm Springs Spas and Bullfrog Spas & others. Telephone style plug connection When replacing this touchpad, please check the circuit board eprom revision number - this touchpad only supports Rev. 5.31. If your circuit board is fitted with Rev 1.31 or other, you will also need to purchase the Rev 5.31 eprom chip listed below. Price: AUD QTY:

	sb 3-60-1087 Spa Builders LX - 10 / LX - 15 Eprom Chip 5.31 Alpha Spa Builders LX - 10 & LX - 15 Eprom programming chip with revision 5.31 Alpha This eprom chip suits the above LX - 15 topside panel touchpad and MUST be replaced along with a failed touchpad if the circuit board revision is other than 5.31 Alpha (ie Revision 1.31 for example). The above touchpad will not work with these older revision circuit boards unless this eprom is purchased and replaces the eprom on the older board (simply pull out/push in) Price: AUD QTY:

	sb 3-00-0075 Spa Builders LX - 25 Topside Touchpad Panel OBSOLETE - NO LONGER AVAILABLE Used on Palm Springs Spas, Bullfrog Spas and others Fitted with main pcb connector and remote touchpad connector. Telephone plug style connections. USE LX-30 PANEL SHOWN BELOW in conjunction with LX 30 Eprom chip below. AUD Sorry.....Obsolete !

	sb 3-00-0049 Spa Builders LX - 30 Topside Touchpad Panel LX-30 topside panel - for use with LX-30 systems, and also as a RETROFIT for obsolete LX-25 topside panels pictured above used on Palm Springs Spas and Bullfrog Spas, in conjunction with a new circuit board eprom chip listed below. Telephone plug style connections. This 11 button LX-30 topside panel gives significantly different display features, but controls the same functions as the LX-25 topside. Hole size required - 145mm x 75mm, overall size - 235mm x 108mm   Price: AUD QTY:

	sb 3-60-1038 Spa Builders LX - 30 Eprom Chip - LX - 25 Upgrade r032p2s LX-30 eprom chip - for use with LX-30 systems, and also as a RETROFIT for use with obsolete LX-25 topside panels pictured above, in conjunction with a new LX-30 topside panel listed above. Replaces the LX-25 eprom chip on the circuit board to enable the functions and integration of the LX-30 panel. (cannot be used with a LX-25 topside panel) Suits systems with 2 spd pump 1, 2 spd pump 2 (single speed pump 2 still supported), blower, light and ozone (not for circulation pump driven heating systems) Also required as an upgrade for replacing corrupted LX - 25 eprom chips, but must also have touchpad replaced with an LX - 30 version. Price: AUD QTY:

	sb 3-00-0142 Spa Builders LX Series 3 Button Remote Touchpad Panel OBSOLETE AUD Sorry ... Obsolete!