Current Category
Electronics Parts - Control Packs / Printed Circuit Boards PCB & Topside Panels > Spa Electronic Controller Circuit Boards > Spa Buiders Systems Group
Spa Builders Systems Group electronic control system components and parts for LX series spa and hot tub controllers such as LX - 10, LX - 15, LX - 20, LX - 25 and LX - 30 used in various spas and hot tubs including Palm Springs Spas (now Palm Beach Spas), and Bullfrog Spas.
The majority of parts are universal, however the circuit boards are designed for Australia and Europe with 240v / 50Hz power supply (many will work on 220v, 60Hz - they can also run on 110v with correct transformer)
See also - Gecko Electronics subcategory - Spa Builders also manufacture Gecko SSPA & MSPA spa packs in white metal casings labeled S-Class & M-Class. All Gecko products are cross compatable.
 |
 |
 |
 |
 |
sb 3-60-0047
Spa Builders LX - 25 / 30 PCB Circuit Board
Used on Palm Springs Spas, Bullfrog spas and others - LX-25 (original Rev. 042P1S, PCB 3-60-0022, Eprom 3-60-1035)
This replacement PCB is p/n. 3-60-0047 and is supplied WITHOUT eprom programming chip
If you are replacing your existing board, re-use original eprom with this new board. If your eprom has failed, you must replace it with the LX-30 eprom listed below, AS WELL AS, your touchpad with an LX - 30 touchpad (LX - 25 eproms are no longer available)
220-240v, 50/60Hz
|
Price:
AUD
|
|
|
 |
 |
 |
 |
|
|
|
|
|
|
 |
sb 3-60-1038
Spa Builders LX - 30 Eprom Chip - LX - 25 Upgrade r032p2s
LX-30 eprom chip - for use with LX-30 systems, and also as a RETROFIT for use with obsolete LX-25 topside panels pictured above, in conjunction with a new LX-30 topside panel listed above. Replaces the LX-25 eprom chip on the circuit board to enable the functions and integration of the LX-30 panel. (cannot be used with a LX-25 topside panel)
Suits systems with 2 spd pump 1, 2 spd pump 2 (single speed pump 2 still supported), blower, light and ozone (not for circulation pump driven heating systems)
Also required as an upgrade for replacing corrupted LX - 25 eprom chips, but must also have touchpad replaced with an LX - 30 version.
|
Price:
AUD
|
|
|
|
|
|
|
|
|
