Price:

AUD

Hot Spring Spas 1500w circulation heater - current style - replaces ALL previous heaters such as 1500w 'No Fault' heaters and older large body heaters with coiled elements on pre 1994 models
Has 2 x temperature sensor locations - hi limit and control. 3/4" barbs for tubing connection

This heater kit is for models with copper capillary thermostats and includes the following:

• 2 x CapOff Plugs with o-rings to close the electronic sensor holes
• 2 x 500mm lengths of heavy duty 3/4" clear tubing.
• 1 x piece of adhesive Aluminium Tape to hold hi-limit capillary sensor to heater body 
• Plug off tube with spring loaded pressure clamp to close off this heater's small outlet fitting.
• 4 x 3/4" spring loaded pressure clamps (wire type)
• 2 x 90 deg elbows (3/4" barbed, high flow, white PVC)
• 15A 3 pin plug
• These extra parts are not needed for Hot Spring Spas with electronic temperature sensors screwed into the heater.